Terms and Definitions


SOT Removal TT-65

TT-65 ThermoTweez®
TT-65 ThermoTweez®

1. Remove conformal coating (if any) and clean work of any contamination,oxides or residues.
2. Set a tip temperature of 343°C (650°F) for lead-free or 316°C (600°F) for leaded alloys and adjust as necessary.
3. Install and align SOT Removal Tips into ThermoTweez® using Tip Tool.
4. Apply flux to all lead/land areas. (A)
5. Clean residue from tips with damp Sponge Tool from Tip Maintenance Station. (B)
6. Lower tips over component and Gently tweeze handpiece contacting ALL leads with tips. (C)
7. Confirm solder melt of ALL joints and lift component from PCB. (D)
8. Release component from tips by wiping on a heat resistant surface.
9. Return ThermoTweez® to its Tip & Tool Stand.
10. Prepare lands for component replacement

PACE SensaTemp® or Intelliheat® Power Supply
TT-65 ThermoTweez®
SOT Removal Tips (See Chart on Back)
Tip Tool
Tip Maintenance Station


Product Image Dimensions Part Number
A=0.76mm (0.03") 1121-0398-P1
A=2.0mm (0.08") 1121-0313-P1
A=4.1mm (0.16") 1121-0399-P1
A=6.4mm (0.25") 1121-0401-P1
A=2.0mm (0.08") 1121-0521-P1
A=0.43mm (0.017") 1121-0517-P1