MBT301 Soldering & Desoldering Station with TD-100A & SX-100

MBT301 Soldering & Desoldering Station with TD-100A & SX-100

PACE's MBT 301 is a self contained, 2 channel rework station that offers high capacity, low temperature SMT/Thru-Hole soldering, desoldering and repair. The unit features 2 individually powered and controlled handpiece channels, providing the capability to run 2 different IntelliHeat handpieces simultaneously, and at different temperatures!

  • Specifications
    Power Requirements
    120 VAC, 60Hz (240 watts maximum) & 230VAC, 50Hz (240 wats Maximum)
    Handpiece Technology Compatability
    IntelliHeat
    Tip to Ground resistance
    <2ohms
    Temperature Stability
    +/- 1.1C (2F)
    Temperature accuracy
    Meets or exceeds ANSI-J-Std-001
    Set Temp Range
    Tip Heater Cartridge Compatible Handpieces = 205° to 454°C (400° to 850°F) Nominal || SensaTemp Compatible Handpieces = 37°C to 482°C (100° to 900°F) Nominal
    Vacuum Rise Time
    150ms Average as measured with PACE Process Monitor
    Vacuum
    20in Hg max
    Pressure
    18psi max
    Air Flow
    8 SLPM max
  • More Information
    mbt 301 features

    The MBT 301 also features a crystal clear Digital LCD Screen which displays the temperatures of both 3 handpiece channels, in real time! The easy to read LCD control panel is uncomplicated with added features such as temperature set back and password protection. The MBT 301 includes new TD-100A Ergonomic Soldering Iron and SX-100 Sodr-X-Tractor Desoldering Handpiece (IntelliHeat versions) along with Tip & Tool Stands. Tips sold separately.

    Includes the new TD-100A!

    tdThe new TD-100A Ergonomic Soldering Iron maintains the comfort and feel of the original TD-100 handpiece yet contains many enhancements. The TD-100A’s Cool Touch design features all-aluminum construction that stays cool and comfortable even during extended production use. Ultra-short tip-to-grip (under 1.9”/48mm) allows for precision operator dexterity when used under a microscope or magnifier. Slim and lightweight, the handpiece dramatically reduces grip stress and operator fatigue, enhancing productivity. The Iron uses a patented Tip-Heater Cartridge which can be changed in seconds without tools, and most tips heat up within 10 seconds flat! Over 100 soldering tip geometries are available as well as over 30 surface mount removal tips. To really protect your Tip-Heater Cartridges and fine point tips from oxidation, the TD-100A can be used with PACE's optional Instant-Setback Cubby. The cubby automatically drops the tip temperature to 176°C (350°F) if it is in the cubby for more than 45 seconds, which maximizes the life of your tips!

    Ideal for both through-hole and surface mount desoldering, the clog-free SX-100 Sodr-X-Tractor is the best performing solder extraction tool on the market today. The handpiece can be used with a disposable Sodr/Flux-Trap paper solder collection chamber or re-cleanable Glass Chamber. When the filter is full, just pull out the chamber, pop out the old filter and replace with a new one - all within 15 seconds! The heater's laser-trimmed, Platinum RTD Temperature Sensor is 5 times more accurate than conventional thermocouples. The widest range of standard, precision and long-reach desoldering tips are available, including 2 and 4-sided Pik-Tips, and Flo-D-Sodr desoldering tips available for safe removal of excess surface solders and BGA pad clean-up.

  • Resources
  • Manuals
    MBT 301 Manual Firmware 2.3 or higher - English