Cir-Kit Master Version (Non-ThermoBond)

Terms and Definitions

A Simple, Low Cost Solution to Damaged Circuitry


PACE Cir-Kit Circuitry Repair Kit, Master Version

Cir-Kit Circuitry Repair Kit, Master Version


PACE Cir-Kit Circuitry Repair Kits are a simple, low cost solution to damaged, lifted or missing circuitry on pc boards, allowing fast repair and modification per IPC 7721. Non-ThermoBond Cir-Kits are available in 3 different Models (Basic, Advanced and Master versions) and include the necessary tools and accessories to install the included frames or eyelets. RoHS Compliant Frames are pre-tinned on both sides and available in a wide variety of land/circuitry sizes and shapes including pads, tracks, traces and runs. Cir-Kit Repair Kits provide a practical solution for restoring the operational reliability to damaged assemblies or the means for modifying circuitry as desired.

A Typical Cir-Kit Pad Repair on 2-Layer PCB

PACE Cir-Kit Circuitry Repair of lifted pad







1) A damaged, lifted pad. 2) Damaged portion is removed/cleaned, plated thru hole is drilled out. 3) Existing run is pre-tinned and cleaned. 4) Appropriate sized Trak-Pad is selected and cleaned with Abrasive Stick. 5) Trak-Pad is cut from Frame. 6) Funnelet (or somtimes an eyelet) is selected. 7) Funnelet is inserted through pcb and Trak Pad is positioned over existing run. 8) Upper and Lower Setting Tools are used to swage and secure the Funnelet through the board and Trak Pad. 9) Funnelet is soldered on both sides, and Trak Pad is reflow soldered to the existing run; Clean. 10) The resulting repair!

Cir-Kit Master Version PN 6993-0082

A deluxe version of Cir-Kit with a full complement of Trak Pad Frames, Eyelets, Funnelets and additional tools/accessories. Master Cir-Kit contains the following:

  • Eyelet 1347-0013 x 100 pcs
  • Eyelet 1347-0016 x 100 pcs
  • Funnelet 1347-0007 x 100 pcs
  • Funnelet 1347-0009 x 100 pcs
  • Funnelet 1347-0010 x 100 pcs
  • Funnelet 1347-0051 x 100 pcs
  • Funnelet 1347-0053 x 100 pcs
  • Abrasive Stick 1129-0014-P10
  • Adhesive Kit 1239-0011-P1
  • Cir-Kit Pad Frame 1200-0070-P1
  • Edge Connector frame 1200-0071-P1
  • Cir-Kit Straight Run Frame 1200-0074-P1
  • Cir-Kit D.I.P. Frame 1200-0072-P1
  • Cir-Kit Variety (Angles, T's, Pads) 1200-0073-P1
  • Setting Tool Assembly 6000-0051-P1
  • Setting Tool Guide Assembly 6000-0054-P1
  • Edge Connector Clamp Assembly 6000-0130-P1 
  • Funnelet Support Tool 1332-0017-P1
  • Support Tool Base 1321-0054-P1
120 V Part #: 6993-0082      NSN: 5895-01-241-5342
230 V Part #: 6993-0082      NSN: 5895-01-241-5342



Process Guides