ADS200 PLUS AccuDrive® Soldering Station with TD-200, ISB Cubby & 3 Tip Bundle (120V Only)

ADS200 PLUS AccuDrive® Soldering Station with TD-200, ISB Cubby & 3 Tip Bundle (120V Only)

PACE’s ADS200 PLUS is a high power (up to 120 Watts), yet low-cost professional soldering station for serious cell-phone repairers, electronics techs, engineers, DIYers & production solder techs. It features the groundbreaking TD-200 Tip-Heater Cartridge Soldering Iron, with its sleek and ergonomic aluminum handle designed to stay cool and comfortable during continuous production soldering. Blue Series Tip-Heater Cartridges integrate a high accuracy sensor with a robust heater, delivering up to 120 Watts of pure power. Three of PACE's most popular Tip Heater Cartridges are included. The bundle also include the Instant SetBack Cubby (ISB) automatically lowers the temperature when the TD-200 is placed in the stand. This will greatly increase tip life as well as save energy.

At the heart of the ADS200 lies PACE’s new AccuDrive® temperature control technology, which delivers unsurpassed thermal performance and highly accurate temperatures, without the need to change tip cartridges or calibrate. Its advanced electronics provide instantaneous load sensing and on-demand power to quickly reflow solder joints at the lowest, safest temperature required, regardless of the mass of the application. Intended for extreme, multi-shift production use, the ADS200 features a rugged, all-metal design, including housing, soldering iron and tool stand. The system is intuitive and easy to operate – just power it on, set the temperature with arrow keys and start soldering. No training required.

  • Specifications
    Dimensions
    104mm (4.1") H x 130mm (5.1") W x 152mm (6") D
    Weight
    2.3kg (5 lbs)
    RoHS Compliant
    Yes
    Control Technology
    AccuDrive®
    Tip-to-Ground Resistance
    2 Ohms or less
    Meets or Exceeds ANSI/J-STD-001
    Yes
    Tested using ANSI/ESD S13.1-2015
    Yes. Tested up to 50MHz using S13.1-2015 Method. Meets or Exceeds J-STD-001 and ESD S20.20 Requirements
    Meets or Exceeds ANSI/ESD S20.20
    Yes
    Temperature Accuracy
    Meets or Exceeds ANSI/J-STD-001 Requirements
    Temperature Range
    193-454°C (380-850°F)
    Tip Compatibility
    Uses AccuDrive™ Blue Series Tip-Heater Cartridges
    Soldering Iron
    TD-200 AccuDrive Tip-Heater Cartridge Soldering Iron
    Tool Stand
    Instant-Setback Cubby. Can hold up to 7 tips, comes standard with sponge, stay moist well and brass wool to clean oxidation from tip
  • More Information

    The ADS200 AccuDrive® System has been updated! 

    As we continue to bring you the best in soldering & rework systems, we’re proud to announce a major update to the ADS200 AccudDrive® System. Starting in the Spring of 2024, the ADS200 will now be called the ADS200 PLUS. Through redevelopment of the entire thermal cycle, from power source to tip heater cartridge, the ADS200 PLUS is now more responsive when higher thermal demand is required in the soldering process, as well as offering improved thermal recovery. PACE is happy to provide these enhancements at no extra cost!

    Premium Quality, High-Powered Soldering Station at a Competitive Price

    ADS200 Info-Graphic
    PACE's ADS200 Station features an intuitive interface with digital display and soft buttons,
    just push the arrow keys up or down to change temperature from 380-850°F (193-454°C)

    Introducing the NEW Cool Touch™ TD-200 Tip-Heater Cartridge Iron

    TD-200 Close-upBeneath its sleek dimensions, comfortable ergonomics and cool touch, the TD-200 makes continuous production soldering effortless. With an ultra-short tip-to-grip (1.9"/48mm) and comfortable ergonomic design, the TD-200 dramatically reduces grip stress and operator fatigue, while delivering precision operator dexterity, especially when used under a magnifier or microscope. The TD-200's aluminum Cool Touch™ handle stays cool and comfortable even during extended production use. And with PACE's new AccuDrive heating technology, this iron provides accurate tip temperatures, heat-up/recovery, and high-capacity heating - all at safe low temperatures.

     

    TD-200_0201-D-Pak-application
    The TD-200 is capable of delivering instant heat-up & recovery, whether it's a delicate
    micro-soldering application (0201's), or high thermal mass application (D-Paks).

    Instant SetBack Cubby (ISB)

    ISB Cubby for the TD-200

    New Tip and Tool Stand for the TD-200 and TD-100A handpieces. The Instant SetBack Cubby (ISB) automatically lowers the temperature when the TD-200 is placed in the stand. This will greatly increase tip life as well as save energy. The Tool Stand features a new wide-angled mouth that allows the operator to easily insert and remove their soldering iron while still being able to hold it securely. Each Tip and Tool Stand allows for safe and secure holding of either handpiece, hot tips, Tip Tool, Water Sponge, Cleaning Brush and can be mounted to the side of of the PACE power source. The unit incorporates a low abrasive dry wipe made of fine metal coil that won't drop tip temperature, cleans better than conventional sponges, won't damage your tips, and allows for removal of caked on/burned-on lead-free fluxes and oxides. The Sponge/Water Well is still included, but not really necessary! Each Tip and Tool Stand is constructed with heavy duty, corrosion resistant metal.

    AccuDrive® Blue Series Tip-Heater Cartridges

    Blue Series Tip Heater Cartridges
    Inexpensive Cartridges Superior Heat Transfer/Delivery
    Less than half the price of most cartridge style or curie point tips,
    delivers lowest cost of ownership.
    Allows for safer, lower temperatures, reduces risk of PCB damage and improves tip life.
       
    One Tip Geometry, Any Temperature  Hot-Swappable Quick-Change Tips 
    Unlike with curie point tips, select any temperature for a chosen tip
    cartridge without having to buy additional ones.
    Fast & easy change-out within 2 seconds, without turning the unit off. 
       
    Accurate, Honest Temperatures  Fast Initial Heat-Up 
    Consistent, accurate tip temperatures meet or exceed J-STD-001 requirements. Achieves set temperatures in seconds. 
       
    High Capacity Integrated Heater Wide Variety of Tip Geometries Available 
    Delivers up to 120 Watts of pure power 

    For the most delicate of micro-soldering to challenging, high thermal mass applications